Optional Peripherals; Introduction; Logicube Clonecard Pro - Logicube SuperSonix User Manual

Introduction

Logicube CloneCard Pro

Logicube SuperSonix User Manual

5. Optional Peripherals

Logicube has many different adapters and other
peripherals that allow you to tackle almost any drive
capturing job. This section focuses on two particular
devices – the CloneCard Pro and the SAS Adapter.
The CloneCard Pro is an optional accessory for the
Logicube SuperSonix. It is an intelligent PCMCIA
adapter designed to provide fast cloning to and
from laptops via the PCMCIA slot. When used
properly, it will support up to 104 MB/min transfer
speed.
The CloneCard Pro is a real time-saver when a
laptop drive needs to be cloned and it is
undesirable to remove the internal hard drive from
the PC. It is designed to work in both PCMCIA (16-
bit) and CardBus (32-bit) systems.
In general, the user would boot the laptop from the
supplied CD-ROM and run a client program. This
client program detects the PCMCIA chipset inside
the laptop and will enable communication to the
CloneCard Pro. Now the Logicube SuperSonix can
be connected to the external cable of the card, and
operation commences as if the Logicube
SuperSonix is connected to the Target hard drive.
All Logicube SuperSonix modes and options are
operational as though an actual drive is connected,
with the exception of the speed of transfer.
52