Miscellaneous; User Selectable Beeper; Usb/Firewire; Contrast Adjust - Logicube SuperSonix User Manual

CLONING MODES AND SETTINGS
20

Miscellaneous

Choose between ON and OFF.
This Icon will present you with four sub-icons
connection choices
The Up/Down arrows allow the user to set the
contrast range between 1 and 32
Place the new Firmware on the root of the system
CF card using the USB to CF or FireWire to CF
icon. The default Password for upgrading the
firmware is logicube (all in lower case). The
SuperSonix must not be turned off or interrupted
during the update process. Once the Firmware
upgrade is complete tap

User Selectable Beeper

USB/Firewire

Connect via USB to CF
Connect via USB to Master
Connect via FireWire to CF
Connect via FireWire to Master

Contrast Adjust

Firmware Upgrade

Logicube SuperSonix User's Manual
to reboot.