Kyocera Mita FS-6020 Service Manual page 27

Connecting the printer cable.
For connection to a computer, parallel interface or
USB interface can be used in the standard
configuration. If an optional network interface card
or serial interface card is installed, network
connection or serial interface connection is
available.
1. Connect the parallel interface cable or the USB
interface cable to their relevant interface
connector.
Connecting the power cord.
1. Connect the power cord to the AC inlet.
USB interface
connector
2
2
Parallel
interface
connector
Figure 1-3-7
Figure 1-3-8
FS-6020
USB interface
cable
1
Parallel interface
cable
Power cord
AC inlet
1-3-5