Detaching And Refitting The Retard Roller - Kyocera Mita FS-6020 Service Manual

(5) Detaching and refitting the retard roller

Perform the following procedure when the retard roller is to be checked or replaced.
Procedure
1. Draw the paper cassette.
2. Remove the retard roller holder from the
paper feed cassette.
3. Remove the retard roller from the holder.
4. Replace or check the retard roller.
5. Refit all the removed parts.
Retard roller
Retard roller holder
Figure 1-6-15
FS-6020
Retard roller holder
1-6-13