Kyocera Mita FS-6020 Service Manual page 89

7. Remove the feed unit (see page 1-6-8).
8. Remove the middle roller guide.
9. Remove the seven screws and then the
bottom frame plate.
10. Remove the two connectors from the engine/
high voltage PWB.
11. Remove the two screws and then the engine/
high voltage PWB.
Screws
Screws
Connectors
Bottom frame
Middle roller guide
Figure 1-6-34
Engine/high voltage PWB
Figure 1-6-35
FS-6020
Screws
1-6-27