Kyocera Mita FS-6020 Service Manual page 58

FS-6020
1-5-14
Continued from
the previous page
Is the paper
feeder installed
properly to the
printer?
Yes
Is the
duplexer installed?
No
Is there any damage to
the harness (S02813)
between the engine/high voltage PWB
and the optional interface connector 1 or improper
connection at the YC15 connector on the
engine/high voltage PWB?
Yes
Carry out the following check
referring to the service manual of the
paper feeder.
Is there any damage to
the harness between the
paper feeder drive PWB and the interface
connector or improper connection at the CN2 or
CN3 connector on the paper feeder
drive PWB?
Yes
Replace the paper feeder
drive PWB.
No
Reinstall the paper feeder.
(Refer to the installation guide.)
Yes
Reinstall the duplexer. (Refer
to the installation guide.)
No
If any problem is found on the
harness or the connector,
repair or replace it.
No
If any problem is found on the
harness or the connector,
repair or replace it.