Kyocera Mita FS-6020 Service Manual page 43

Service items
Code digit and
description
8
Main cause 10: Paper does not arrive at the registration sensor.
of paper 11: Paper does not pass the registration sensor.
misfeed 12: Paper remains at the registration sensor when power is turned on.
(hexade- 20: Paper does not arrive at the eject sensor.
cimal) 21: Paper does not pass the eject sensor.
22: Paper remains at the eject sensor when power is turned on.
30: Paper does not arrive at the paper feeder 1 feed sensor.
31: Paper does not pass the paper feeder 1 feed sensor.
32: Paper remains at the paper feeder 1 feed sensor when power is turned on.
40: Paper does not arrive at the paper feeder 2 feed sensor.
41: Paper does not pass the paper feeder 2 feed sensor.
42: Paper remains at the paper feeder 2 feed sensor when power is turned on.
50: Paper does not arrive at the paper feeder 3 feed sensor.
51: Paper does not pass the paper feeder 3 feed sensor.
52: Paper remains at the paper feeder 3 feed sensor when power is turned on.
60: Paper does not arrive at the paper feeder 4 feed sensor.
61: Paper does not pass the paper feeder 4 feed sensor.
62: Paper remains at the paper feeder 4 feed sensor when power is turned on.
A1: Paper does not arrive at the duplexer switchback timing sensor.
A2: Paper does not arrive at the duplexer refeed rear edge sensor.
A3: Paper does not pass the duplexer switchback timing sensor.
A4: Paper does not arrive at the duplexer refeed eject sensor.
A5: Paper does not pass the duplexer refeed rear edge sensor.
A6: Paper does not pass the duplexer refeed eject sensor.
A7: Duplexer overflow (Third sheet is commanded when second sheet remains.)
A8: Duplexer drive signal output from the printer while paper is transported turns off.
A9: Paper remains in the duplexer when power is turned on.
AA: The rear cover of the duplexer is opened while paper is transported.
B1 to B3, C1: Reserved
E0: Paper misfeed occurs due to forced stop when an error occurs during printing. (such
as opening of a cover)
F0 to FF: Paper misfeed by another cause
9
(a) Misfed 0000 to FFFF [in 0.1 mm]
paper width Example: 73FA (hexadecimal) = 29690 (decimal) = 296.9 mm
(hexade-
cimal)
(b) Misfed 0000 to FFFF [in 0.1 mm]
paper length Example: A8C0 (hexadecimal) = 43200 (decimal) = 432.0 mm
(hexade-
cimal)
Description
Details of code
FS-6020
1-4-9