8.3 THIRD STAGE (DISASSEMBLY OF
FRONT AXLE CASE)
1. Pull out snap ring (1) and disassemble plug (2).
2. Pull out snap ring (3) and disassemble bevel gear
(5) and shim (6).
(When reassembling)
•
Make sure the type and number of shim is correct.
•
Apply DX bush (7) contacted surface with grease,
taking care of assembly direction.
A. DX Bush Assembling Method
Align bush hole with oil passage hole of front axle case
and always use assembly fixture.
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(1) Snap Ring
(2) Plug
(3) Snap Ring
(4) Ball Bearing
(1) Oil Passage
FRONT AXLE
615W717A
(5) Bevel Gear
(6) Shim
(7) DX Bush
615W718A
(2) DX Bush
7-13