Seventh Stage (Disassembly Of Main Transmission Counter Shaft) - Cub Cadet 8354 Service Manual

10.7 SEVENTH STAGE (DISASSEMBLY OF MAIN TRANSMISSION COUNTER SHAFT)

(1) Snap Ring
(2) Ball Bearing
(3) Ball Bearing
(4) Thrust Collar
(5) Needle Bearing
1. Loosen snap ring (1) for shaft.
2. Pull out bearing (2), (3) using bearing puller.
3. Disassemble thrust collar (4), needle bearing (5),
(6), and gear (7), (8).
4. Loosen snap ring (9) and disassemble synchro hub
assembly (10), gear (11), (12) and needle bearing.
(When reassembling)
• Take case of assembly position of needle bearing
by specification.
• 24 Gear side: 25*30*20
• 29 Gear side: 32*37*27
• When assembling synchronizer ring (13), ensure
the groove position of synchronizer key (14) is
correct.
• Ensure oil groove of thrust collar towards gear.
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(6) Needle Bearing
(7) 24 Gear
(8) 36 Gear
(9) Snap Ring
(10) Synchro Hub Assembly
• 33 Gear side: 32*37*27
• 36 Gear side: 25*30*13
TRANSMISSION
(11) 29 Gear
(12) 33 Gear
(13) Synchronizer Ring
(14) Synchronizer Key
615W455A
4-33