Power Steering Unit - Cub Cadet 8354 Service Manual

CHAPTER 8 8354/8404

8.2 POWER STEERING UNIT

A. Disassembly, Assembly
a. Disconnection of Power Steering Unit
Assembly
First Stage (Disconnection of Steering Hose)
• Disengage steering hose (1), (2), (3), (4) connect-
ing nut and disconnect hose from power steering
unit (5).
(When reassembling)
• When connecting with power steering unit hose, make
sure color and connecting port of hose are correct.
Connecting port
T Steering hose assembly T
(Green color)
P Steering hose assembly P
(Red color)
R Steering hose assembly R
(White color)
Steering hose assembly L
L
(Yellow color)
Sect. Spec.
Steering hose
PF 1/4
tightening nut
Second Stage (Disconnection of Steering Unit)
• Loosen bolt (1) and disconnect power steering unit
(2).
(When reassembling)
• When attaching with power steering unit, apply bolt
with bonding agent and tighten to the specified
torque.
Bonding agent Loctite #242 or equivalent
Sect. Spec.
Power steering unit M10
tightening bolt
8-14
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Hose type
Tightening torque
46.6 ~ 50.9 N·m
4.8 ~ 5.2 kgf·m
34.4 ~ 37.6 lbf·ft
Tightening torque
48.0 ~ 55.9 N·m
4.9 ~ 5.7 kgf·m
35.5 ~ 41.2 lbf·ft
(1) Steering Hose Assembly T
(2) Steering Hose Assembly P
(3) Steering Hose Assembly R
(4) Steering Hose Assembly L
(1) Bolt
615W816A
615W817A
(2) Steering Unit
D615-W02 May-2003