Disassembly, Assembly; Disconnection Of Rear Axle Group - Cub Cadet 8354 Service Manual

CHAPTER 5 8354/8404

4. DISASSEMBLY, ASSEMBLY

4.1 DISCONNECTION OF REAR AXLE
GROUP
A. First Stage (Disconnection of Rear Wheel)
1. Support the transmission case with a hydraulic jack
to raise tire the tires from the ground.
2. Loosen the wheel lug nuts and disconnect the tires
from axle.
(When reassembling)
Sect. Spec.
Rear wheel M16
tightening nut
• Tighten the wheel lug nuts firmly in a diagonal
sequence.
B. Second Stage (Disconnection of Rear Axle
Case)
1. Loosen bolt (1) and nut (2) and disconnect rear axle
case (3) in assembly.
(When reassembling)
• Wipe out oil or foreign matters from the contacted
surface between brake case and rear axle case and
apply with sealing agent.
Sealing agent Three bond 1208D or equivalent
Sect. Spec.
Tightening bolt, nut
M10
5-6
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Tightening torque
260.8 ~ 303.8 N·m
26.6 ~ 31.0 kgf·m
192.3 ~ 224.2 lbf·ft
Tightening torque
48.1 ~ 55.9 N·m
4.9 ~ 5.7 kgf·m
35.4 ~ 41.2 lbf·ft
(1) Nut
(1) Bolt
(2) Nut
615W504A
(2) Wheel
615W505A
(3) Rear Axle Case
D615-W02 May-2003