10.2 ACTING VALVE
A. Operation principle
A double acting detent type auxiliary control valve is
used, and the construction is shown in the figure right.
When the auxiliary control valve operating lever is moved
to the implement cylinder actuating position, the spool
is moved and the oil from the pump port flows into A to
B, causing the implement cylinder to operate.
The return oil from the implement cylinder flows out of
the tank port through A of B and returns to the transmis-
sion case.
This type is equipped with a special non-return valve
which ensures that oil under pressure is held where
required. This guarantees that implements will be held
at a steady height which no change of lowering.
B. Circuit diagram
10.3 QUICK COUPLER
D615-W03 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(10) Screw
(11) Cover
(12) Seal Cover
(13) Valve Seat
(14) Spring
615W947B
(15) Valve
(16) Valve Seat
HYDRAULIC SYSTEM
(1) Body
(17) Elastic Pin
(2) Nut
(18) Plug
(3) Screw
(19) O-Ring
(4) Cover
(20) Spring
(5) Nut
(21) Ball
(6) O-Ring
(22) Ball
(7) O-Ring
(23) Articulation
(8) Screw
(24) Pin
(9) Washer
(25) Seal Ring
(26) O-Ring
(27) Pilot Spool
(28) Washer
(29) Spring
(30) Screw
(31) Spacer
(1) Coupler Socket (Male)
(2) Coupler Socket (Female)
(3) Pocket
615W922B
615W923A
(4) Ball
(5) Sleeve
9-19