Brake Case; Disassembly And Assembly - Cub Cadet 8354 Service Manual

7. BRAKE CASE

7.1 DISASSEMBLY AND ASSEMBLY

A. Disconnection of Brake Case Group
a. First Stage (Disconnection of Brake Case)
(1) Bolt
(2) Nut
(3) Brake Case
(4) Lever Shaft
(5) Stud
1. Disengage bolt (1) and nut (2) and disconnect brake
case (3) in assembly.
(When reassembling)
• Make sure assembly position of lever shaft (4), bolt
(1), and stud (5) is correct. Assembly position: see
figure and following table.
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(6) Packing
(7) Packing
(8) Ball Seat
(9) Ball
•
•
Bonding agent
•
Replace packing (6) and (7).
Apply stud (5) with bonding agent.
Three bond 1372 or equivalent
Apply ball seat (8) with grease sufficiently and make
sure ball (9) not escaped.
BRAKE
615W608A
6-9