Second Stage (Disconnection Of Propulsion Shaft Case) - Cub Cadet 8354 Service Manual

10.2 SECOND STAGE (DISCONNECTION OF
PROPULSION SHAFT CASE)
1. Loosen clutch release fork (1) locking bolt (2) and
pull out main clutch lever (3).
2. Disconnect clutch release hub (4) and release bear-
ing (7).
3. Loosen propulsion shaft case (5) attaching bolt (6)
and using M6 service bolt (two), disconnect propul-
sion case.
(When reassembling)
• Apply the slip of propulsion case and release hub
with grease.
• Wipe out foreign matters or oil from the contacted
surface of clutch housing and propulsion shaft case
and apply with sealing agent.
Sealing agent Three bond 1208D or equivalent
Sect. Spec.
Tightening bolt, nut M8
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Tightening Torque
23.5 ~ 27.4 N·m
2.4 ~ 2.8 kgf·m
17.3 ~ 20.2 lbf·ft
(1) Clutch Release Fork
(2) Bolt With Washer
(3) Main Clutch Lever
(4) Clutch Release Hub
TRANSMISSION
615W447A
615W448A
(5) Propulsion Shaft Case
(6) Bolt With Washer
(7) Release Bearing
(8) Service Bolt
4-29