Text-In Screen; Figure 3-70 Text-In Settings Screen - Honeywell HRXDS16D1T User Manual

6.
7.

Text-In Screen

1.
2.
3.
94
Highlight the box under the Spot Monitor column, then press #. A list of SPOT
monitors and cameras appears. Each SPOT monitor can be associated with a
camera. The DVR will display the associated camera on the SPOT monitor
whenever it detects video loss on the selected camera.
To save your video loss changes, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
In the Event menu (see
setup screen appears.
Figure 3-70
The DVR can be set to react to text input from devices such as ATMs (Automated
Teller Machines) and POS (Point of Sale; that is, cash registers). This screen
allows you to configure the DVR for each text-in device.
Highlight the box under the Setup column, then press #. Selecting the Setup
heading changes all the parameters excluding Port settings of all the text input
channels.
Note The system performance might be affected when a large
quantity of text inputs are detected from several channels at the
same time.
Note VP Filter, Generic Text and EPSON-POS devices are currently
supported.
3-54) highlight Text-In, then press #. The Text-In
Figure
Text-In Settings Screen
HRXDS Series DVR User Guide