Connecting Audio; Connecting The Monitor; Figure 2-4 Audio Connectors; Figure 2-5 Vga Connector - Honeywell HRSD8 User Manual

Installation

Connecting Audio

Your DVR can record audio from up to two sources. Connect the audio sources to
Audio In 1 and Audio In 2 as needed using RCA jacks. Connect Audio Out to your
amplifier.

Connecting the Monitor

Using a Computer Monitor
A VGA connector is provided so that you can use a standard, multi-sync computer
monitor as your main monitor. Use the cable supplied with your monitor to connect it to
the DVR.
Using a Spot Monitor
Connect the main monitor to the Video Out connector. Connect the spot monitor to the
SPOT connector as needed.
Document 800-03650 Rev D
02/09
Note It is the user's responsibility to determine if local laws and
regulations permit recording audio.
Figure 2-4 Audio Connectors
Note The DVR does not have amplified audio output, so you need a
speaker with an amplifier. The DVR does not have a pre-amplifier
for audio input, so the audio input should be from an amplified
source, not directly from a microphone.
Figure 2-5 VGA Connector
25