Table of Contents
Advertisement
Doors, Storage and Hatches
Head Door
The vented poly head door is equipped with a locking white twist latch. To open the door, just twist the latch and
pull the door open. When closing the door, the latch will engage itself. The door should never remain open when
you are underway or when conditions might cause a passenger to lose their balance and accidentally fall through
the doorway.
The locking latch comes with a set of two numbered keys. We recommend that you make note of the key number
and keep it in a safe place. In the event that you need to replace the keys, this will allow you to replace just the
keys and not the entire lock assembly.
recommendations.
Transom Door
The poly transom door is located on the starboard aft corner of the boat.
The sliding bolt style latch secures the door in the closed position. To
open the door, slide the latch starboard (to the right when standing on the
dive platform).
The transom door should always remain closed while
underway.
See the Service and Care section of this manual for cleaning
recommendations.
Storage
Your boat has lots of storage for your tackle and gear:
•
Electronics box in the console
•
Tackle box at the port aft corner of the transom comes with 3 trays for your small tackle.
•
Console electronics box for your electronics; includes a locking latch.
•
Storage area installed in the port freeboard next to the helm seat; includes a locking latch.
•
Storage shelf installed along with the raw water washdown is located in the starboard freeboard
next to the helm seat; includes a locking latch.
•
Storage compartment below the forward console seat.
•
Two casting deck storage boxes next to the forward fish box; includes locking latches.
•
Tackle box is installed below the leaning post when you select one of the optional leaning posts;
includes a locking latch.
Rod Holder Storage – In addition to the rod holders installed on the optional rigid T-Top frame, the following rod
holder storage is available:
•
Rod Holders with Inserts - Two pair of stainless steel rod holders with PVC inserts to protect your
rods
•
Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft cockpit.
Combined, they can accommodate up to 4 fishing rods.
•
Outriggers (Optional) - This option requires the installation of the optional rigid T-top frame. The
outrigger installation includes a pair of outrigger bases, poles and lines.
constructed of anodized aluminum and are installed on the port and starboard sides of the
optional T-top. Turn the handle at the bottom of the outrigger base to rotate the outriggers 90
degrees (from the side to the aft end of the boat).
Fire Extinguisher Holder – A fire extinguisher holder installed on the port side freeboard is located within easy
reach of the helm seat.
Hatches and Latches
The fiberglass deck hatches for the forward and aft bilges, the fish boxes and the casting deck storage boxes (not
dry storage) can easily withstand the weight of passengers and gear; just like the rest of the deck surfaces. The
twist latches that are installed on the fiberglass deck hatches are made of stainless steel. Just lift the handle of
See the Service and Care section of this manual for cleaning
The bases are
28
Advertisement
Table of Contents
