Setup - Strong SRT 5200 User Manual

5.2.4 lCn mode
If LCN (Logical Channel Number) is activated and LCN signal is provided by operator,
then channels will be stored at operator defined order. You can activate/deactivate the
LCN function by setting the "LCN Mode" to ON/OFF.

5.3 Setup

This menu allows you to set OSD Language, Subtitles preference, TV System, Region and
Time, Timer Setting, OSD Setting and Parental Lock.
1. Press pq buttons to highlight desired menu and press oK button to
enter the setting menus. Then press pq buttons to select desired item.
Settings can be changed by pressing tu buttons. You can get better
overview if press oK first. Now you can select desired setting by pq
buttons and confirm it with oK.
2. Press EXIT button to exit.
5.3.1 oSD language
This menu allows you to set OSD Language.
5.3.2 Subtitles preference
This menu allows you to set preferred Subtitles Language and select Subtitles Type
between Normal and Hard of Hearing.
5.3.3 Tv System
This menu allows to setup different settings concerning your TV set.
Display Mode:
Aspect Ratio:
Video Output:
5.3.4 Region and Time
Here you can set your region and time zone.
Region:
GMT Usage:
GMT Offset:
Date/Time:
Time Display:
10
PAL/NTSC/AUTO
Use this menu to configure the screen aspect between: 4:3PS
(Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen), and AUTO.
Switch the video output mode either to RGB or to CVBS
This menu is used for changing the region setting.
This menu is used for usage of GMT.
The options are: Off / User Define / By Region
This menu is valid only when selected "User Define" in GMT
Usage menu. The GMT offset range is "-11:30 ~ +12:00",
increasing by half hours progressively.
"Date" and "Time" menus are valid only when selected "Off" in
GMT Usage menu. Press oK then numeric button to change the
date and time.
This menu allow to control whether the time is displayed on
screen or not. The options are: Off/On.
PART 1 • English