Connection; Connecting To Tv And Terrestrial Antenna; Connecting To Tv And Vcr; Connecting To A Digital Audio Amplifier - Strong SRT 5200 User Manual

PART 1 • English
User-friendly Remote Control
n
NTSC/PAL converting automatically and manually
n
3 Games (Tetris, Snake, Othello)
n
Digital sound through coaxial output (S/PDIF) by connecting to
n
digital amplifier
DVB-T compliant, UHF/VHF Tuner with Loop-through function
n
Support of active antenna by 5 V output
n
Power saving automatic standby function
n
* Depending on local signal conditions; ** Availability depending on broadcaster
Accessories:
1 User Manual
n
1 Remote control unit
n
2x Batteries (AAA type)
n
note: The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure
long time operation of remote control.

2.0 ConnECTIon

2.1 Connecting to Tv and Terrestrial Antenna

To receive the broadcast signal, the terrestrial antenna cable should be connected to
the ANT IN connector at the back of the receiver. (Fig. 1)

2.2 Connecting to Tv and vCR

The models SRT 5202 and SRT 5205 can be connected with a VCR using a SCART
cable. (Fig. 1)

2.3 Connecting to a Digital Audio Amplifier

Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the
receiver (Fig. 1).

2.4 Connecting to RCA (Audio l/R, video)

The model SRT 5205 can be alternatively connected to the TV set with the RCA cinch
connectors on the back of the receiver (Fig. 2).

3.0 YoUR RECEIvER

3.1 front Panel

SRT 5205: LED Display and USB connector on front (Fig. 3)
5