Strong SRT 5200 User Manual page 14

PART 1 • English
5.3.5 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number:
Timer Mode:
Timer Service:
Wake-up Channel:
Month/Date/Day:
Time:
When you want to quit programme timer, a saving window appears, with tu select
Yes in the confirmation window and press oK to save or select No to cancel.
Duration:
Sleep Timer
You can set the receiver to power OFF in 10 min, 30 min, 60 min, 90 min and
120 min automatically.
5.3.6 oSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency, and
Load Default OSD Setting.
Subtitle Display:
OSD Transparency: To set the OSD transparency from Off ~ 50 %.
OSD Timeout:
Load Default OSD Setting:
5.3.7 Parental lock
This menu allows you to protect the installation menu, or channels with a password
and you can change the Password. If you want to enter the menu you will be asked to
input the password (default: 0000).
Menu Lock:
Channel Lock:
New Password:
Confirm Password: To confirm the new password.
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto
Standby is ON. The receiver will switch to standby automatically when it doesn't
receive commands from the remote control for three hours. To avoid the automatic
switch off, set Auto Standby to OFF.
You can set 8 timers
Off/Once/Daily/Weekly/Monthly
TV Service/Radio Service
You can select a desired channel as wake-up channel.
Press pq buttons to select your desired month, date and day.
Press oK to input the time with the numeric buttons.
Press oK to input desired duration with the numeric buttons.
To set the subtitle to Standard or OFF.
To define how long the information banner is to be shown (5S~10S)
To clear all OSD settings and reset to default value.
Locks the installation menu. You can set menu lock to ON/OFF.
Off/Manual/Age:4 - Age:18
To change the password.
11