Related Manuals for Strong SRT 5303
Summary of Contents for Strong SRT 5303
- Page 1 Digital Terrestrial Receiver SRT 5303 User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Manual del usuario Návod k obsluze Používateľská príručka Upute za korištenje...
-
Page 4: Table Of Contents
6.3 Accessing the favourite channels 7.0 TRoublE shooTIng 8.0 sPECIfICATIons sTRong declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, Rohs 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. -
Page 5: Instruction
Attachments – For your safety and to avoid damaging the product, use only accessories recommended by STRONG. Water and moisture – Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement. swimming pool or in the rain) location –... -
Page 6: Storage
PART 1 • English heat – Never use or store this product near any heat source such as a radiator heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. servicing – Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points. -
Page 7: Accessories
„ „ the receiver. Always make backups of data on USB storage device before usage with receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information. 2.0 ConnECTIon 2.1 Connecting to Tv and Terrestrial Antenna To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver. -
Page 8: Your Receiver
PART 1 • English 3.0 YouR RECEIvER 3.1 front Panel fig. 2 Connects to USB storage device 3.2 Rear Panel fig. 3 1. AnT In To connect an antenna for reception of broadcasting signal. Active antennas can be supported with max. 5 V/500 mA DC. 2. -
Page 9: Default Pin- Code: 0000
PART 1 • English 22. subTITlE Shows list of subtitled languages 23. 5 6 Rewind/Fast forward of video files 24. ColouRED buTTons for Teletext and other functions 3.4 Default PIn- code: 0000 4.0 fIRsT TImE InsTAllATIon If you use the receiver for the first time, the Easy Install menu appears. Use pq to select Region, OSD Language, Antenna Power and Scan Mode and tu to select options. -
Page 10: Radio Channel List
PART 1 • English Press 3 to Skip one channel or all channels. Use tu to select Yes in the skip: confirmation window and press oK to save. Selected channel/s will be marked with the EnTER and will be skipped during channel zapping in full screen mode. -
Page 11: Installation
PART 1 • English group Rename In this menu you can change the name of favourite groups. Use the pq buttons to select Group Rename and press oK to enter. 1. Select a group with pq and press oK. 2. Use the pqtu buttons to navigate the on screen keyboard. Highlighted characters can be inserted by pressing oK. -
Page 12: Setup
PART 1 • English 5.3 setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. 1. Use pq to highlight the desired menu and press oK to proceed. Select the desired item with pq. -
Page 13: Tools
2. Press EXIT to leave. 5.4.1 Receiver Information This menu displays relevant Receiver information like the Receiver Model, Software version, Signature, and our website www.strong.tv. 1. In Tools menu, select Receiver Information and press oK to open receiver information. 2. Press EXIT to leave. -
Page 14: Media
This receiver is equipped with an over the air update function, which might not be operational in your broadcast region. For further details visit our website www.strong.tv or contact your local Service line. 5.5 media+ The Media+ menu consists of following submenus: Media Player, Record Manager, Removable Disk... -
Page 15: Media Player
PART 1 • English 1. Press mEnu to enter main menu. Select Media+ and press oK to enter Media+ menu. 2. Press pq to highlight desired menu and press oK to enter. 3. Press EXIT to exit. Use the three button rows on the bottom of RCU for player operation. Description for further usage of buttons will be displayed on screen. -
Page 16: Time Shift And Recording Functions
PART 1 • English 2. Use pq to select a desired item and use tu to change settings. 3. Press EXIT to exit. Timeshift Time(min): Maximum shifted time 10/20/30/40/50/60 Record Type: TS/PS (TS mode will record all broadcasted data, including subtitles) Standby Mode: ON/ OFF (After a Timer recording has ended.) Record Recovery:... -
Page 17: Operation
PART 1 • English from EPg Press the EPg button to enter the programme guide. Select an event and channel with the buttons described on screen. Once the desired event is highlighted, press 4 / 4 to plan a timer on this event. The event time will be copied into a free Program Timer. -
Page 18: Accessing The Favourite Channels
If the receiver does not work properly after checking it, please contact your local Service line or STRONG dealer. Alternatively you can send a support mail via our website: www.strong.tv. Do noT open the receiver cover. It may cause a dangerous situation and will void the warranty. -
Page 19: Specifications
PART 1 • English Problem Possible cause What to do After moving the receiver Antenna signals are too weak/ Press the Info button on to another room / area you coming from different antenna remote 3x to call up signal are no longer able to receive Antenna feed may come bars and adjust antenna for... - Page 20 PART 1 • English memory and system: Flash memory: 1 MByte SDRAM: 8 MBytes Connectors: ANT IN - IEC Female TO TV - IEC Male TV SCART (RGB, CVBS) VCR SCART S/PDIF: coaxial output USB 2.0 port, max. 5 V/800mA general Data: Supply Voltage: 220 - 240 V AC (SMPS), 50/60 Hz...
- Page 21 PART 1 • English...