Multicast Forwarding - D-Link DES-1228/ME User Manual

To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter
VID
MAC Address
Port
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding X
under the Delete heading.

Multicast Forwarding

The following figure and table describe how to set up Multicast Forwarding on the Switch. To view this window, click
Administration > Forwarding & Filtering > Multicast Forwarding:
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding
table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
The following parameters can be set:
Parameter
VID
Multicast MAC
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Allows the selection of the port number on which the MAC address entered above resides.
Figure 6-42. Multicast Forwarding Settings window
Figure 6-43. Setup Static Multicast Forwarding Table window
Description
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
The MAC address of the static source of multicast packets. This must be a multicast MAC
62