Sntp Settings; Time Settings - D-Link DES-1228/ME User Manual

SNTP Settings

Time Settings

This window is used to configure the time settings for the Switch. To view this window click, Administration > SNTP Settings
> Time Settings.
The following parameters can be set or are displayed:
Parameter
Current Time
Time Source
SNTP State
SNTP Primary Server
SNTP Secondary
Server
SNTP Poll Interval in
Seconds
Year
Month
Day
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 6- 18. Time Settings window
Description
Displays the Current Time set on the Switch.
Displays the time source for the system.
Use this pull-down menu to enable or disable the SNTP settings. Enabling and configuring
SNTP support will override any manually configured system time settings.
This is the IP address of the primary server the SNTP information will be taken from.
This is the IP address of the secondary server the SNTP information will be taken from in
the event the primary server is unavailable.
This is the interval, in seconds, between requests for updated SNTP information.
Enter the current year, if you want to manually update the system date.
Enter the current month, if you would like to manually update the system date.
Enter the current day, if you would like to manually update the system date.
Current Time
SNTP Settings
Set Current Time
45