IMP Entry Settings
This table is used to create Static IP MAC Binding Port entries on the switch.
To view this window click, Security > IP-MAC-Port Binding > IMP Entry Settings
The following fields can be set or modified:
Parameter
IP Address
MAC Address
Ports
Click Add for implement changes, click Find to search for an entry, click View All for the table to display all entries and click
Delete to remove an entry.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 10- 6. IMP Entry Settings window
Description
Enter the IP address to bind to the MAC address set below.
Enter the MAC address to bind to the IP Address set above.
Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC
Address). Click the All check box to configure this entry for all ports on the Switch.
151