Snmp Engine Id; Forwarding & Filtering; Unicast Forwarding - D-Link DES-1228/ME User Manual

The following parameters can set:
Parameter
Host IP Address
SNMP Version
Community String/
SNMP V3 User Name
To implement your new settings, click Apply. To return to the SNMP Host Table, click the
link.

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the
SNMP engine on the Switch. To display the Switch's SNMP Engine ID, click Administration > SNMP Manger > SNMP
Engine ID.
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
Forwarding & Filtering

Unicast Forwarding

To view this window, click Administration > Forwarding & Filtering > Unicast Forwarding. This will open the following
window:
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Description
Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
V1 - To specifies that SNMP version 1 will be used.
V2 - To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Type in the community string or SNMP V3 user name as appropriate.
Figure 6- 40. SNMP Engine ID Configuration window
Figure 6- 41. Unicast Forwarding window
61
Show All SNMP Host Table Entries