Time Zone And Dst - D-Link DES-1228/ME User Manual

Time in HH MM SS
Click Apply to implement changes made.

Time Zone and DST

The following are windows used to configure time zones and Daylight Savings time settings for SNTP. Open the Administration
folder, then the SNTP Settings folder and click on the Time Zone and DST link, revealing the following window.
The following parameters can be set:
Parameter
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Enter the current time in hours, minutes, and seconds.
Figure 6- 19. Time Zone and DST Settings window
Description
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST offset
- 30, 60, 90, or 120 minutes.
Time Zone and DST
46