Igmp Snooping Group - D-Link DES-1228/ME User Manual

IGMP Snooping Group

This window allows the Switch's IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the
Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The number of
IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group window, click Monitoring > IGMP Snooping Group:
The user may search the IGMP Snooping Group Table by VID by entering it in the top left hand corner and clicking Search.
The user may also delete Data Driven learning entries by entering the VLAN Name and clicking Delete, or Delete All Data
Driven learning Entries.
The following parameters can be viewed:
Parameter
VLAN Name/ID
Multicast Group
MAC Address
Reports
Port Map
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features folder and select IGMP
Snooping. Configuration and other information concerning IGMP snooping may be found in
Section 7 of this manual under IGMP Snooping.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 11- 17. IGMP Snooping Group window
Description
The VLAN Name or ID of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
These are the ports where the IGMP packets were snooped are displayed.
203