DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Port Mapping Priority Settings
When using the port-based priority mechanism, the port-based priority (high or low) assigned to each ingress port determines the
egress queue assigned to frames arriving via the given ingress port. The frames will be assigned to either the highest queue or the
lowest queue.
Please note the following limitation exists: port-based CoS only supports mapping to Queue 3.
Port mapping Priority Settings can be specified on this window. Select a port range using the From and To drop-down menus and
select a Class.
To view this window click CoS > Port Mapping Priority Settings:
Figure 8- 10. Port Mapping Priority Settings window
Click Apply to implement changes made.
125