Session Table; Port Access Control; Radius Authentication - D-Link DES-1228/ME User Manual

Interval
After making the desired changes, click Apply to implement the new Gratuitous ARP Table entry.

Session Table

The Session Table allows the user to view detailed information on the current configuration session of the Switch. Information
such as the Session ID of the user, initial Login Time, Live Time, configuration connection From the Switch, Level and Name
of the user are displayed. Click Reload to refresh this window. To view this window click Monitoring > Session Table.

Port Access Control

The following windows are used to monitor 802.1X statistics of the Switch, on a per port basis. To view the Port Access Control
windows, open the Monitoring folder and click the Port Access Control folder. There are six windows to monitor.
NOTE: The Authenticator State, Authenticator Statistics, Authenticator Session Statistics and
Authenticator Diagnostics windows in this section cannot be viewed on the Switch unless 802.1X is
enabled by port or by MAC address. To enable 802.1X, go to the Switch 802.1X entry in the DES-
1228/ME Web Management Tool.

RADIUS Authentication

This table contains information concerning the activity of the RADIUS authentication client on the client side of the RADIUS
authentication protocol. It has one row for each RADIUS authentication server that the client shares a secret with. To view the
RADIUS Authentication, click Monitoring > Port Access Control > RADIUS Authentication.
The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands for seconds. The
default value is one second. To clear the current statistics shown, click the Clear button in the top left hand corner.
The following fields can be viewed:
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 11- 26. Session Table window
Figure 11- 27. RADIUS Authentication window
208