Gvrp Settings - D-Link DES-1228/ME User Manual

None
Egress
Forbidden
Click Apply to implement changes made. Click the
window.

GVRP Settings

The GVRP Settings window, shown below, allows you to determine whether the Switch will share its VLAN configuration
information with other GARP VLAN Registration Protocol (GVRP) enabled switches. In addition, Ingress Checking can be used
to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port. Results can be seen in the table
under the configuration settings, as seen below. To view this window click L2 Features > VLAN > GVRP Settings.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Allows an individual port to be specified as a non-VLAN member.
Select this to specify the port as a static member of the VLAN. Egress member ports are ports
that will be transmitting traffic for the VLAN. These ports can be either tagged or untagged.
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Show All Static VLAN Entries
75
link to return to the 802.1Q Static VLANs