D-Link DES-1228/ME User Manual page 190

Port (1-65535)
Timeout (1-255)
Retransmit (1-255)
Key
Click Apply to add the server host.
NOTE: More than one authentication protocol can be run on the same physical server host but,
remember that TACACS/XTACACS/TACACS+ are separate entities and are not compatible with
each other
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
•
TACACS+ - Enter this parameter if the server host utilizes the TACACS+
protocol.
•
RADIUS - Enter this parameter if the server host utilizes the RADIUS protocol.
Enter a number between 1 and 65535 to define the virtual port number of the authentication
protocol on a server host. The default port number is 49 for TACACS/XTACACS/TACACS+
servers and 1813 for RADIUS servers but the user may set a unique port number for higher
security.
Enter the time in seconds the Switch will wait for the server host to reply to an authentication
request. The default value is 5 seconds.
Enter the value in the retransmit field to change how many times the device will resend an
authentication request when the TACACS server does not respond.
Authentication key to be shared with a configured TACACS+ or RADIUS servers only.
Specify an alphanumeric string up to 254 characters.
177