User Accounts - D-Link DES-1228/ME User Manual

The following parameters may be configured or viewed.
Parameter
DHCP/BOOTP Local
Relay Operation State
VLAN Name
VID List
State
Click Apply to implement changes made.

User Accounts

Use the User Account Management window to control user privileges. To view existing User Accounts, open the
Administration folder and click on the User Accounts link. This will open the User Account Management window, as shown
below.
To add a new user, click on the Add button.
Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm New Password.
Choose the level of privilege (Admin or User) from the Access Right drop-down menu. To return to the User Account Table click
the hyperlinked Show All User Account
To modify or delete an existing user, click on the Modify button for that user.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Description
Used to Enable or Disable the DHCP/BOOTP Local Relay Operation State.
This is the VLAN Name that identifies the VLAN the user wishes to apply the
DHCP/BOOTP Local Relay Operation.
This is the VLAN ID that identifies the VLAN list the user wishes to apply the
DHCP/BOOTP Local Relay Operation.
Enable or Disable the DHCP/BOOTP Local Relay Settings state.
Figure 6- 9. User Accounts window
Figure 6- 10. User Account Modify Table window
Entries.
37