Driver Installation; Figure 2.1 Advantech Automation Software Setup Screen - Advantech PCI-1730 User Manual

2.3

Driver Installation

We recommend you to install the driver before you install the PCI-1730/1733/1734
card into your system, since this will guarantee a smooth installation process.
The Advantech Device Driver Setup program for the PCI-1730/1733/ 1734 card is
included on the companion CD-ROM that is shipped with your DA&C card package.
Please follow the steps below to install the driver software:
1. Insert the companion CD-ROM into your CD-ROM drive.
2. The Setup program will be launched automatically if you have the autoplay func-
tion enabled on your system. When the Setup Program is launched, you'll see
the following Setup Screen.
Note! If the autoplay function is not enabled on your computer, use Windows
Explorer or Windows Run command to execute SETUP.EXE on the
companion CD-ROM.

Figure 2.1 Advantech Automation Software Setup Screen

3. Select the Individual Drivers option.
4. Select the specific device then just follow the installation instructions step by
step to complete your device driver installation and setup.
11 PCI-1730/1733/1734 User Manual