Configuring the Device
4.
On the PCI-1730 Device Setting dialog box (Fig. 2-6), you can configure the
IDI00, IDI01 and DI00, DI01 Interrupt trigger mode either as Rising Edge or Fall-
ing Edge, and Enable or Disable the IDI00, IDI01 and DI00, DI01.
Figure 2.6 Device Setting Dialog Box
5.
After you have finished configuring the device, click OK and the device name
will appear in the Installed Devices box as seen below:
Note!
As we have noted, the device name "000:<PCI-1730 BoardID=0 I/
O=1000H>" begins with a device number "000", which is specifically
assigned to each card. The device number is passed to the driver to
specify which device you wish to control.
After your card is properly installed and configured, you can click the Test... button to
test your hardware by using the testing utility we supplied. For more detailed informa-
tion, please refer to Chapter 2 of the Device Drivers Manual.
You can also find the rich examples on the CD-ROM to speeding up your program-
ming.
Figure 2.7 The List of Devices Box
15
PCI-1730/1733/1734 User Manual