Driver Installation; Installation Instructions - Advantech PCI-1220U User Manual

2.2 Driver Installation

We recommend you install the software driver before installing the PCI-
1220U module, since this will guarantee a smooth installation process.
The 32-bit DLL driver Setup program for the PCI-1220U module is
included on the companion CD-ROM that is shipped with your module
package.
For further information on driver-related issues, an online version of the
Device Drivers Manual is available by accessing the following path:
Start\Programs\Advantech Automation \Device Manager\Device
Driver's Manual

2.3 Installation Instructions

The PCI-1220U can be installed in any PCI slot in the computer. How-
ever, refer to the computer user's manual to avoid any mistakes and dan-
ger before you follow the installation procedure below:
1. Turn off your computer and any accessories connected to the computer.
Warning!TURN OFF your computer power supply whenever you
install or remove any card, or connect and disconnect cables.
2. Disconnect the power cord and any other cables from the back of the
computer.
3. Remove the cover of the computer.
4. Select an empty +3.3/+5V PCI slot. Remove the screw that secures the
expansion slot cover to the system unit. Save the screw to secure the
interface card retaining bracket.
5. Carefully grasp the upper edge of the PCI-1220U. Align the hole in the
retaining bracket with the hole on the expansion slot and align the gold
striped edge connector with the expansion slot socket. Press the card
into the socket gently but firmly. Make sure the card fits the slot
tightly.
6. Secure the PCI-1220U by screwing the mounting bracket to the back
panel of the computer.
7. Attach any accessories to the card.
8. Replace the cover of your computer and connect the cables you
removed in step 2.
9. Turn the computer power on.
9 Chapter 2