Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech PCI-1713U
Summary of Contents for Advantech PCI-1713U
- Page 1 PCI-1713U 32-ch Isolated Analog Input Card User Manual...
- Page 2 No part of this man- ual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reli- able.
- Page 3 Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or...
- Page 4 This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
- Page 5 Safety Instructions Read these safety instructions carefully. Keep this User's Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean- ing. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
- Page 6 The sound pressure level at the operator's position according to IEC 704- 1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. PCI-1713U User Manual...
-
Page 7: Table Of Contents
Contents Chapter 1 Overview ............2 Introduction ............... 2 Features ................3 Specifications ..............3 Block Diagram ..............5 Chapter 2 Installation ............8 Initial Inspection..............8 Unpacking ................. 8 Installation Instructions ............. 9 Chapter 3 Signal Connections ........12 Overview ................. - Page 8 PCI-1713U User Manual viii...
- Page 9 Overview Sections include: • Introduction • Features • Specifications • Block Diagram...
-
Page 10: Chapter 1 Overview
Chapter 1 Overview 1.1 Introduction The PCI-1713U is a 12-bit 32-channel analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 100k sam- ples/s, 12-bit resolution and isolation protection of 2500 VDC. -
Page 11: Features
Satisfies the Need for Isolation Protection The PCI-1713U provides 2500VDC optical isolation protection between the inputs and the PC bus to protect the PC and peripherals from damage due to high voltages on the input lines. It is ideal for the situations where budget-conscious users require flexibility, stability and a high level of isolation protection for their data acquisition system. - Page 12 • Operating temperature: 0 ~ +60 °C (32 ~ 140 °F) • Storage temperature: -20 ~ +70 °C (-4 ~ 158 °F) • Operating humidity: 5 ~ 95%RH non-condensing • MTBF: over 85,310 hrs @ 25 °C, grounded, fixed environment PCI-1713U User Manual...
-
Page 13: Block Diagram
1.4 Block Diagram Chapter 1... - Page 14 PCI-1713U User Manual...
- Page 15 Installation Sections include: • Initial Inspection • Unpacking • Installation Instructions...
-
Page 16: Chapter 2 Installation
It should be free of marks and in perfect order upon receipt. As you unpack the PCI-1713U, check it for signs of shipping damage (damaged box, scratches, dents, etc.). If it is damaged or fails to meet specifications, notify our service department or your local sales represen- tative immediately. -
Page 17: Installation Instructions
Save the screw to secure the interface card retaining bracket. 5. Carefully grasp the upper edge of the PCI-1713U. Align the hole in the retaining bracket with the hole on the expansion slot and align the gold striped edge connector with the expansion slot socket. - Page 18 PCI-1713U User Manual...
- Page 19 Signal Connections Sections include: • Overview • I/O Connector • Analog Input Connections • Field Wiring Considerations...
-
Page 20: Chapter 3 Signal Connections
PCI-1713U card via the I/O connector. 3.2 I/O Connector The I/O connector for the PCI-1713U card is a 37-pin D-type connector which you can connect to 37-pin D-type accessories with Advantech's PCL-10137 cable. - Page 21 Figure 3.1: I/O Connector Pin Assignments Chapter 3...
-
Page 22: Analog Input Connections
A signal source without a local ground is also called a “floating source”. It is fairly simple to connect a single-ended channel to a floating signal source. In this mode, the PCI-1713U card provides a reference ground for external floating signal sources. - Page 23 If one side of the signal source is connected to a local ground, the signal source is ground-referenced. The ground of the signal source and the ground of the PCI-1713U will not be at exactly the same voltage, as they are connected through the ground return of the equipment and building wiring.
- Page 24 You must therefore reference the signal source to the AIGND. Figure 3-4 shows a differential channel connection between a floating signal source and an input channel on the PCI-1713U card. In this figure, each side of the floating signal source is connected through a resistor to the AIGND.
-
Page 25: Field Wiring Considerations
External Trigger Source Connection In addition to pacer triggering, the PCI-1713U card also allows external triggering for A/D conversions. A low-to-high edge coming from EXT_TRG will trigger an A/D conversion on the PCI-1713U board. Note: Don't connect any signal to the EXT_TRG pin when the external trigger function is not being used. - Page 26 PCI-1713U User Manual...
- Page 27 Calibration Sections include: • Introduction • VR Assignments • Board ID Settings • A/D Calibration...
-
Page 28: Chapter 4 Calibration
Regular calibration checks are important to maintain accuracy in data acquisition and control applications. To assist users in the A/D calibra- tion process, we provide the Advantech Device Manager, on the PCI- 1713U software CD-ROM. The Advantech Device Manager makes A/D calibrations easy. It leads... -
Page 29: Board Id Settings
ID setting function is useful for identifying each card°¶s device number through board ID. We set the PCI-1713U board ID as 0 at the fac- tory. If you need to adjust it to other board ID, set the SW1 by referring to DIP switch setting. -
Page 30: A/D Calibration
4.4 A/D Calibration Connect Pin1 to Pin9 and measure the output as "V1" from TP1. (PCI-1713 only, not available for PCI-1713U) PCI-1713U User Manual... - Page 31 0.1mV in the beginning and you get V2 as 0.02mV after adjusting the VR4, you have to adjust the VR4 again. (PCI-1713 only, not available for PCI-1713U) Input -5V to AI0 by signal generator and check if the "Decimal" flickers between 0 and 1. For example, it is 3 for my calibration, so I have to adjust the VR2.
- Page 32 Input 5V to AI0 by signal generator and check if the "Decimal" flickers between 4094 and 4095. Input 5V to AI1 by signal generator and check if the "Decimal" flickers between 2047 and 2048. Calibration finished. PCI-1713U User Manual...
- Page 33 1713U A/D code Mapping Voltage Unipolar 0 to Hex. Dec. Bipolar ±5V 000h -4.9971V 7FFh 2047 -0.0024V 4.9947V 800h 2048 4.9971V FFFh 4095 +4.9947V 9.9918V Chapter 4...
- Page 34 PCI-1713U User Manual...
- Page 35 Specifications...
-
Page 36: Appendix A Specifications
175 x 100 mm (6.9" x 3.9") Power Consumption Typical +5 V @ 850 mA Max. +5 V @ 1 A Temperature Operation 0~60°C (32~140°F) Storage -20~70°C (-4~158°F) Relative Humidity 5~95%RH non-condensing (refer to IEC 68-2-3) Certification CE certified PCI-1713U User Manual... -
Page 37: Analog Input
A.2 Analog Input Channels 32 single-ended or 16 differential or combination Resolution 12-bit FIFO Size 4k samples Max. 100 kS/s Sampling Rate Isolation 2,500 V Protection μ Conversion Time Input Range Gain and Gain List Unipolar 0~10 0~2.5 0~1.25 Bipolar ±10 ±5 ±2.5... - Page 38 *Note: The maximum input voltage may vary according to the common mode voltage as shown below: -10,14 -2,14 2,12 10,4 -10,-4.1 -2,-12 3,-14 10,-13.8 Input Voltage(V) PCI-1713U User Manual...