Standard Features And Benefi Ts; Figure 2, Top Side Features - Magnum Energy MM Series Owner's Manual

Standard Features and Benefi ts
The MM Series inverter
from your battery to 120 Volts Alternating Current (VAC) power.
models with the multi-stage battery charger feature, the incoming AC
power is optimized using Power Factor Correction (PFC) technology to
keep the inverter's battery bank fully charged. This inverter is de-
signed to allow easy installation and use and with its die-cast alumi-
num baseplate, which ensures maximum durability and cooler more
effi cient operation.
The inverter is equipped with the following features:
• 600 or 1200 watts continuous (depending on model) at 25° Celsius.
• Numerous protection features to provide a safe and peace-of-mind
operation.
• AC transfer switch circuitry; allowing incoming AC power to continue
to pass-thru to power loads even if the inverter is off.
• Dead battery charging (battery charger models) for charging
batteries that are extremely low.
• Automatic 4-stage battery charger with power factor correction and
temperature compensation – for optimum battery charging (models
with battery charger and using the temperature sensor).
• Modern and aesthetically pleasing design with large AC wiring
compartment (provides easy access to AC wiring for simple and
quick connections) and 360° DC connection terminals with color-
coded insulating covers.
• True RMS output voltage regulation to ensure the inverter will deliver
the correct amount of power – within the DC input voltage range and
the continuous output power level.
• Quick connection accessory and remote ports – easily accepts
several optional remote controls and the Battery Temp. Sensor.
© 2010 Magnum Energy, Inc.
converts 12 Volts Direct Current (VDC) power

Figure 2, Top Side Features

1.0 Introduction
1 2
5
8
7
On
3
4
6
3