Features And Benefi Ts; Figure 1-1, Power Switch, Status Led, And Accessory Connection Ports - Magnum Energy MagnaSine Hybrid Mobile Series Owner's Manual

Introduction
1.3 Features and Benefi ts
The MSH-M Series inverter/charger is designed to allow easy access to wiring, circuit breakers,
and controls. Its die cast baseplate with one-piece aluminum cover ensures maximum durability
with minimum weight, as well as cooler, more effi cient operation.
The front of the MSH-M inverter is equipped with the following features (refer to Figures 1-1
and 1-2):
Power ON/OFF Switch – a momentary pushbutton switch that alternately turns the
1
inverter on or off.
Status LED Indicator – this green LED illuminates to provide information on inverter
2
or charger operation.
Stack/Accessories Connection Port (red label) – a RJ11 port that accepts optional
3
accessories. Note: the MSH-M Series does not have the ability to be stacked.
Network Connection Port (green label) – a RJ11 port that accepts optional network
4
capable accessories (i.e., Auto Gen Start or Battery Monitor).
Remote Connection Port (blue label) – a RJ11 port that allows an optional remote
5
control to be connected.
Battery Temperature Sensor Connection Port (yellow label) – a RJ11 port that
6
accepts the remote Battery Temperature Sensor (BTS).

Figure 1-1, Power Switch, Status LED, and Accessory Connection Ports

Page 3
1 Power ON/OFF Switch
Status LED
2
(Charging/Inverting)
Accessories Port
3
(red label – RJ11 connection)
Network Port
4
(green label – RJ11 connection)
Remote Port
5
(blue label – RJ11 connection)
Battery Temperature Sensor Port
6
(yellow label – RJ11 connection)
© 2013 Magnum Energy, Inc.