Cisco 7942G Administration Manual page 97

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-22
Table 4-22 802.1X Authentication Real-Time Status
Option
802.1X Authentication
Status
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
describes the 802.1X Authentication Real-Time Status.
Description
Real-time progress of the 802.1X authentication
status, displaying one of the following states:
• Disabled—802.1X is disabled and transaction
was not attempted
Disconnected—Physical link is down or
•
disconnected
Connecting—Trying to discover or acquire the
•
authenticator
Acquired—Authenticator acquired, awaiting
•
authentication to begin
Authenticating—Authentication in progress
•
Authenticated—Authentication successful or
•
implicit authentication due to timeouts
Held—Authentication failed, waiting before
•
next attempt (approximately 60 seconds)
Security Configuration Menu
To Change
Display only—Cannot configure.
4-33