Cisco 7942G Administration Manual page 73

Unified ip phone for cisco unified communications manager 6.1(3)
Hide thumbs Also See for 7942G:
Table of Contents

Advertisement

Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-3
IPv4 Configuration Menu Options (continued)
Option
DNS Server 1
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
DHCP Server
DHCP Address Released Releases the IP address assigned by DHCP.
Alternate TFTP
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Description
Primary Domain Name System (DNS) server (DNS
Server 1) and optional backup DNS servers (DNS
Server 2–5) used by the phone.
IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the phone obtains
its IP address.
Indicates whether the phone is using an alternative
TFTP server.
Network Configuration Menu
To Change
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the appropriate DNS Server
3.
option, press the Edit softkey, and
then enter a new DNS server IP
address.
Press the Validate softkey.
4.
5.
Repeat Steps 3 and 4 as needed to
assign backup DNS servers.
Press the Save softkey.
6.
Display only—Cannot configure.
1.
Unlock network configuration
options.
Scroll to the DHCP Address
2.
Released option and press the Yes
softkey to release the IP address
assigned by DHCP, or press the No
softkey if you do not want to release
this IP address.
3.
Press the Save softkey.
Unlock network configuration
1.
options.
Scroll to the Alternate TFTP option
2.
and press the Yes softkey if the
phone should use an alternative
TFTP server.
Press the Save softkey.
3.
4-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g

Table of Contents