Security Configuration Menu - Cisco 7942G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-17 Network Configuration Menu Options (continued)
Option Description
LLDP-MED: SW Port Enables and disables Link Layer Discovery
Protocol Media Endpoint Discovery (LLDP-MED)
on the switch port. Use this setting to force the
phone to use a specific discovery protocol, which
should match the protocol supported by the switch.
Settings include:
LLDP Power Priority Advertises the phone's power priority to the
switch, enabling the switch to appropriately
provide power to the phones. Settings include:
LLDP Asset ID Identifies the asset ID assigned to the phone for
inventory management.
Related Topics
•
•

Security Configuration Menu

The Security Configuration menu that you access directly from the Settings menu provides information
about various security settings. It also provides access to the CTL File screen and the Trust List menu,
if a CTL file is installed on the phone.
Table 4-18
The phone also has a Security Configuration menu that you access from the Device menu. For
Note
information about the security options on that menu, see the
page
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Enabled—default
•
Disabled
•
Unknown—default
•
Low
•
High
•
Critical
•
Displaying a Configuration Menu, page 4-2
Network Configuration Menu, page 4-5
describes the options in this menu.
4-22.
Security Configuration Menu
To Change
From Cisco Unified Communications Manager
Administration, choose
Device > Phone > Phone Configuration
From Cisco Unified Communications Manager
Administration, choose
Device > Phone > Phone Configuration
From Cisco Unified Communications Manager
Administration, choose
Device > Phone > Phone Configuration
"Security Configuration Menu" section on
4-27