Network Configuration Menu - Cisco 7942G Administration Manual

Unified ip phone for cisco unified communications manager 6.1(3)
Hide thumbs Also See for 7942G:
Table of Contents

Advertisement

Device Configuration Menu

Network Configuration Menu

The Network Configuration menu displays device-specific network configuration settings on the phone
Table 4-17
Note
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
information about the options on that menu, see the
Table 4-17
Network Configuration Menu Options
Option
Description
Load Server
Used to optimize installation time for phone
firmware upgrades and offload the WAN by storing
images locally, negating the need to traverse the
WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the phone
firmware can be retrieved for phone upgrades.
When the Load Server option is set, the phone
contacts the designated server for the firmware
upgrade.
Note
RTP Control Protocol
Indicates whether the phone supports the
Real-Time Control Protocol (RTCP). Settings
include:
If this feature is disabled, several call statistic
values display as 0. For additional information, see
the following sections:
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-24
describes the options in this menu.
The Load Server option allows you to
specify an alternate TFTP server for phone
upgrades only. The phone continues to use
TFTP Server 1 or TFTP Server 2 to obtain
configuration files. The Load Server
option does not provide management of the
process and of the files, such as file
transfer, compression, or deletion.
Enabled
Disabled—default
Call Statistics Screen, page 7-11
Streaming Statistics, page 8-11
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
"Network Configuration Menu" section on page
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
.
4-5.
OL-17679-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g

Table of Contents