Appendix 5. Equipment Software Upgrades - NiceUC NC-AD300E User Manual

**48*yymmdd#
**48*yymmddhhmmss#
**49*00#
**49*01#
**49*02#
**96#
**97#
**98* new IP address# Set
**99#

Appendix 5. Equipment software upgrades

Note: Be careful about software upgrade ,improper operation will cause the device not work.
Start the FTP service, put the file will be upgraded (usually Pbxe.bin) into the FTP root
directory. in running state, input the command
follows:Upload file of AD300E to FLASH!
Message show as
Data in FLASH will be erased, continue? (Y/N)
HOST: server --->
here to enter the FTP host IP address. The default is server IP
address in startup parameters.
USER:ad300e --->
here to enter the FTP account name. The default is ad300e.
PASSWORD: nice--->Here Here to to to to enter Here Here
FILENAME: pbxe.bin--->
Loading......
Received bytes:
number of bytes shown here updated.
......
l
After oading is complete successfully , restart the equipment to be effect.
In boot state, use command
In the [Boot]: prompt, enter
boot device
unit number
processor number
host name
file name
inet on ethernet (e) : 192.168.16.155:ffff0000
host inet (h)
user (u)
ftp password (pw)
Set year-month-day
Set year-month-day-hour-miniute-second
Select present time
Select time(hhmmss)
Select
Device version ID
Device
device
XXX*XXX*XXX*XXX
Attach device IP address
ldapp
enter the enter enter the the FTP the FTP FTP FTP password password ,default password password
Enter to load the upgrade file name. The default is
"u" to do upgrade.
"u", message show as follows:
: at
: 0
: 0
: server
: pbxe.st
: 192.168.16.5
: ad300e
: nice
NC-AD300E Manual
address,the format
to upgrade.
Y
Enter to continue, type
,default :nice ,default ,default :nice :nice :nice
is
N
is cancel.
pbxe e e e .bin pbx .bin。 。 。 。
pbx pbx .bin .bin
- 62 -