Ss7 Signaling - NiceUC NC-AD300E User Manual

slots can be blocked.
After completion of editing, write to ROM, restart the device for effective.

5.2.4.3 SS7 Signaling

For use of signaling SS7, you must first add the link parameter. In Index area select SS7
signaling, right click mouse button to add a new SS7 link in Parameter area.
This Can also be done in the "Data" menu, select "Add", or click
add a link. Once installed, then modify the parameters one by one.
Link ID, Internal index number for SS7.
NC-AD300E Manual
on the toolbar Button to
- 28 -