Appendix 3. Recording Tone And Load To Pbx - NiceUC NC-AD300E User Manual

Finally, click "Done" button to complete.
If you need to display the log, in the "Logging" menu, select "Log options", the pop-up
"Logging options" Settings dialog box.
Check the appropriate option, click "OK".

Appendix 3. Recording tone and load to PBX

You can use the recording software (such as Windows system with a tape recorder) to record
tone. Saved as a wav sound files, format must be used CCITT A-Law, 8kHz, 8 bit, mono, 7kb /
sec. After recording finished, use NiceVocMake.exe for formate transfer.
Run NiceVocMake.exe, interface is as follows.
NC-AD300E Manual
- 59 -