Calling Trace; E1 Monitor - NiceUC NC-AD300E User Manual

setlcdr setlcdr setlcdr setlcdr
ErrorCode ErrorCode ErrorCode ErrorCode
ErrorHelp ErrorHelp ErrorHelp ErrorHelp
Note that all of the commands are case-sensitive.

7.3 calling trace

Using setlapp 7 command can track calling record .

7.4 E1 monitor

The small tools of NiceMonitor.exe
network connections. In the configuration tool interface, the parameters of the index area, select
"SysPart" in the right to see the UDP port.
7400 is commonly used.
Monitoring software interface is as follows:
NiceMonitor can monitor all of the equipment from Nice Communication which has E1 interfaces.
m
ultiple devices can be monitored, the port for each device must be set to different values.
Add your equipment, by click the shortcut of
Trace levels (0 ~ 7)
Mistake code
is to
monitor the E1 status of AD300E. Monitor use UDP
NC-AD300E Manual
Track,then send the case
See the error code information
Show trace levels of the detailed description
of
, input the parameter of this device:
- 53 -