Modify The Boot Parameters - NiceUC NC-AD300E User Manual

processor number:0
host name:server
file name:pbxe.st
inet on ethernet(e):192.168.16.254:FFFFFF00
host inet (h):192.168.16.85
gateway inet (g):192.168.16.1
user (u) :ad300e
ftp password (pw):nice
flags (f):0x0
DeviceID :0x0

4.3.2 modify the boot parameters

If in boot state, "[Boot]:"
If in running state, "->" type
Instructions:
Type the new value directly behind the old value, enter the changes, and then move to the
next one.
Enter ".", Then delete the current content.
Enter "-" then return to the previous row to make changes.
Enter "Ctrl + D", exit change.
Directly press enter, will move to the next one.
boot device: at0 can not be changed
processor number: 0
host name: server can be freely modified
file name: pbxe.st according to the actual file name changes
inet on ethernet (e): 192.168.16.254: FFFFFF00
Modification form must be filled, if not the subnet mask, default taken 255.255.255.0
host inet (h): 192.168.16.85
Upgrade by FTP software to use, usually do not need to modify
gateway inet (g): 192.168.16.1
Intenet using to access the gateway address, depending on the network situation.
user (u): ad300e according to practical situation
ftp password (pw): nice
flags (f): 0x0
Parameter values can be bitwise combination.
0x04 – go to the boot startup state, rather than running state.
0x08 - Quick Start to run state can not enter to boot state.
0x20 - Disable Telnet login account authentication.
0x40 - use DHCP to automatically obtain parameters.
number of processors
host name
netloaded at startup from the network file names
FTP host IP address of service
Ethernet Gateway IP adress
connect FTP service user name
connect FTP service password
boot parameters
device ID
type "c"
"cboot"
can not be modified
according to practical situation
NC-AD300E Manual
device itself ipaddress:Subnet Mask
- 16 -