Device Ip Address; View Ip Address - NiceUC NC-AD300E User Manual

0x80 - load the boot image from tftp.
0x100 - use proxy arp service.
0x200 --
0x400 – load from ftp to boot
0x800 - manually set the MAC address.
0x1000 - start the DHCP service.
0x2000 - use watchdog.
target name (tn): e3
startup script (s): must be empty
other (o): must be empty
DeviceID: 0x0 can be freely modified
Note that the modification will be effect after re-start up.

4.4 Device IP Address

4.4.1 View IP address

A) ipconfig
Use the ipconfig command to query the device IP address for the primary user. Examples are
as follows
-> Ipconfig
ip = 192.168.16.100: ffff0000
the device IP address "192.168.16.100", the subnet mask for the hexadecimal form converted to
decimal as "255.255.0.0".
B) ifconfig
Use ifconfig command to query the device IP address for the primary user. Examples are as
follows
-> Ifconfig
ip = 192.168.16.100: ffff0000
the device IP address "192.168.16.100", the subnet mask for the hexadecimal form converted to
decimal as "255.255.0.0".
C) ifShow
Use ifShow command to view the device details of network parameters for advanced users.
Examples are as follows
-> IfShow
at (unit number 0):
Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNING
Type: ETHERNET_CSMACD
Internet address: 192.168.6.100
Broadcast address: 192.168.255.255
Netmask 0xffff0000 Subnetmask 0xffff0000
Internet address: 200.0.6.99
can be freely modified
NC-AD300E Manual
- 17 -