Table of Contents
Advertisement
a computer's hard drive, RAM is the computer flash memory, can only choose one of them.
5.1.4 Write device parameters
After a successful connection, point
If you write to the success of all the parameters will be prompted to write to finish.
Write operations, you need to pay attention "to read and write target" option. Write ROM
data is not lost after power-down, write RAM data will be lost after power-down, but some
parameters can take effect immediately (without restarting equipment with immediate effect). also
proposes to select the ROM and RAM in the same time for write operation.。
5.1.5 Load Parameters
Device parameters can be saved as a text file form. The text file can be loaded into the device,
commonly used to restore the backup configuration. Point
select "Import."
Note that the import operation is just the parameters loaded into the buffer configuration
tool,and not written to the device.
5.1.6 Export Parameters
Device parameters can be saved as a text file. This is mainly for the back up the configuration
of the devices. Click
Button or in the "File" menu, select "Export."
Note, remember to read the the device configuration before do the export action.
5.1.7 Reset Device
Click
Button or in the "Device" menu, select "Reset", the equipment can be reset.
When modify parameters, it is recommended to read out the parameters of the device and import
to back up first, and try to back up for each modification to avoid mistake and can not be
recovered.
Button or in the "Device" menu, select "Write."
Button or in the "File" menu,
NC-AD300E Manual
- 22 -
Advertisement
Table of Contents
