Function Deployment; Ringback Tone Settings; Ring Duration Time Set; Automatic Recording Settings - NiceUC NC-AD300E User Manual

5.3 Function Deployment

AD300E provides basic switch functions, also provide their own special features, and correctly
configured is required to make it work properly.

5.3.1 Ringback Tone settings

AD300E can customize their own personalized ringback tones. Operation is as follows:
1. AD300E convert audio files to use library files, steps see the attached 4.
2. Audio library file loaded into the device, the steps see attached 4.
3. Using the configuration tool to modify the parameters.Goes to "SysPart->Sys Function" to
see below:
AD300E can specify three kinds of ringback tones. "Ext" means the ringback tone when call
from FXO, "Int"means ringback tone between extensions, "Trans" means ringback tone when
answer foract.
After completion of editing, writing to ROM and RAM, can be effective immediately.

5.3.2 Ring Duration time set

AD300E can specify a different method calls ringing circumstances. Goes to "SysPart->Sys
Function" to see below:
" Call out Back" means the system automatically calls the situation, and other undefined
conditions are by "default" processing.
After completion of editing, writing, ROM and RAM, can be effective immediately.

5.3.3 Automatic recording settings

AD300E can set to recording for all calls. Recording server software need to run in this case.
NC-AD300E Manual
- 43 -